Aluminum pilfer proof cap punching machine

aluminum-cap-machine1
Punching machine (16 tons) with mould & accessories 32mm aluminum cap
Rating: Not Rated Yet
Description

1, Punching machine (16 tons) with mould (3 cavities) & accessories, for 32mm aluminum cap 

1.1 Components of the Machine

a. 16 tons power press, 380V (compatible with 440V);

b. Mould with 3 cavities for 32mm cap, made as per customer's cap drawing and samples;

c. Machine control system;

d. Uncoiler and servo motor powered material feeder;

e. Aluminum coil lubrication system;

f. Air generator and cap blowing system;

g. Ring separator and conveyor belt;

h. Recoiler of waste material

i. Mould protection system;

j. Hand protection system;

1.2 Capacity: 24000-27000 caps per hour (frequency: 135-150 times/min)

1.3 Aluminium coil width: 151mm

1.4 Spare parts: 50% parts of the 5 cavities.

1.5 Tools: Standard tools for repair and maintenance of the machine & mould.

 

 

2, Punching machine (16 tons) with mould (5 cavities) & accessories, for 20mm aluminum cap 

2.1 Components of the Machine

a. 16 tons power press, 380V (compatible with 440V);

b. Mould with 5 cavities for 20mm cap, made as per customer's cap drawing and samples;

c. Machine control system;

d. Uncoiler and servo motor powered material feeder;

e. Aluminum coil lubrication system;

f. Air generator and cap blowing system;

g. Ring separator and conveyor belt;

h. Recoiler of waste material

i. Mould protection system;

j. Hand protection system;

2.2 Capacity: 40000-44000 caps per hour (frequency: 135-150 times/min)

2.3 Aluminium coil width: 151mm

2.4 Spare parts: 50% parts of the 5 cavities.

2.5 Tools: Standard tools for repair and maintenance of the machine & mould.

 

 

3, Punching machine (16 tons) with mould (7 cavities) & accessories, for 13mm or 15mm aluminum cap 

3.1 Components of the Machine

a. 16 tons power press, 380V (compatible with 440V);

b. Mould with 7 cavities for 13mm cap, made as per customer's cap drawing and samples;

c. Machine control system;

d. Uncoiler and servo motor powered material feeder;

e. Aluminum coil lubrication system;

f. Air generator and cap blowing system;

g. Ring separator and conveyor belt;

h. Recoiler of waste material

i. Mould protection system;

j. Hand protection system;

3.2 Capacity: 55000-60000 caps per hour (frequency: 135-150 times/min)

3.3 Aluminium coil width: 159mm

3.4 Spare parts: 50% parts of the 7 cavities.

3.5 Tools: Standard tools for repair and maintenance of the machine & mould