Golden Aluminium Foil For Pharmaceutical Pilfer Proof Caps

Lacquered aluminium coil for pharmaceutical caps & flip off seals & vial seals & Pilfer Proof Caps
Alloy 8011 temper h14 
Thickness 0.17-0.23mm 
Width 50-1000mm 
Tensile strength 125-155mpa 
elongation 3% 
earring 2% max 
Coating type: 
1. One side color coating golden and the other side clear/transparent protective lacquer/varnished 
2. Both sides clear/transparent coating/varnished 
Coating material: Food grade epoxy or polyester 
Test of coating: Autoclavable, heat-resistance, steam resistance, MEK wiping resistance, grid test, etc 
Main applications: Aluminum closures, pharmaceutical vial seals, flip off / tear off vial seals; Caps, closures and vials for the pharmaceutical industry. Closures pilfer proof for the pharmaceutical industry. Lids and containers for the cosmetics industry.
Packing: 50~100KGS/coil as your requirement, strong wooden cases, about 23-25 tons within 20' FCL 
Delivery Time: 25~35 days after order and deposit 

Advantage

1. The aluminium foil is processed using a degreasing and pre-treatment, improve the protection against corrosion and the lacquer adherence over the aluminium surface.

2. Ideal mechanical properties for deep drawing process ( low earring rate properties).

3. Lacquers used has been specially developed by our technical department to be very flexible and with special slipping properties.

4. Authorized for contact with foodstuffs (FDA).

5. Wide color range and good printability

6. Coating Lacquer Resistant to Acetone and high pressure boiling water.

7. Over 15 years rich experience of aluminium foil/coil/sheet/strip coating

8.Reasonable competitive price, High quality, Prompt delivery

9.Well in pre-sale service & best after-sale service